66
External Display
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] -
[Advanced] - [Monitor] - [Properties] - [Driver] - [Update Driver]
If a picture is not displayed properly, lower the level of [Hardware acceleration] in the
following menu.
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] -
[Advanced] - [Troubleshoot]
With Extended Desktop, you can use both the internal LCD and the external display as an
extended display domain. You can also drag a window from the internal LCD to the external
display. To use Extended Desktop;
1 Display [Intel(R) Extreme Graphics 2 M] screen.
Select [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme
Graphics 2 M] - [Devices].
2 Select [Extended Desktop], make the settings for [Primary Device]
and [Secondary Device].
To make the settings for each display (colors, screen area, etc.), select [Device
Settings] and change the settings where necessary, then select [OK].
3 Select [OK].
At the confirmation message, select [OK].
NOTE
There are some applications that cannot be used in the Extended Desktop.
When the button to maximize a window is pressed, one of the displays will show the
maximized display.
A window that has been maximized cannot be moved to the other display.
You cannot switch the display destination by pressing
Fn
+
F3
.
When the Extended Desktop is being utilized;
• The pop-up window displayed by
Fn
key combination is shown only on the primary
device.
Extended Desktop
To Next Page
Loading...
