15
Getting Started
This concludes the first-time use operation guidelines.
<Only for models with touchscreen>
If the cursor cannot be pointed correctly with the stylus, calibrate the touchscreen fol-
lowing the procedure below.
1 Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -
[TouchScreen] - [Calibration].
2 Touch the “+” mark on the calibration screen with the stylus (included) for about
one second.
3 After the calibration procedure is executed (e.g., after the nine “+” marks are
touched), the procedure ends when Enter is pressed.
4 Select [OK].
About the Icon Enlarger:
• If the characters or icons on the screen are too small and difficult to see, after complet-
ing step
9
, select [start] - [All Programs] - [Panasonic] - [Icon Enlarger]. This will
allow you to magnify the display of characters and icons on the screen.
• The [Icon Enlarger] can be set separately for each account.
You can also use [Loupe Utility], which enlarges a part of the screen. ( “Loupe
Utility”)
<Only for models with wireless LAN>
If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wireless LAN”.
NOTE
<Languages installed in this computer>
·English ·French ·German ·Italian ·Spanish ·Swedish
·Dutch ·Finnish ·Russian ·Turkish ·Norwegian
Change the language settings in the following menu.
[Start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Regional and Lan-
guage Options]
[Regional Options] - [Standards and Formats]:
The currency, weights and measures, and so on, will be displayed according to the locale.
[Languages] - [Language used in menus and dialogs]:
The menus and help files of Windows will be displayed in individual languages.
[Advanced] - [Language for non-unicode Programs]:
If you will be running non-Unicode programs on the MUI (Multilingual User Interface) system,
you should set this menu to match the language of the non-Unicode programs. Since this is a
system wide setting, only one language is supported concurrently on the system.
Note that only a user with the administrator authority can change this setting.
Setting Languages <For MUI OS model>
To Next Page
Loading...
