37
Power Management
Power Saving [Standard (Battery)]
CPU Speed Change Mode Enable
HDD Motor Timeout 1 min
Standby Timeout 2 min
Power Switch [Hibernation]
Hibernation Timeout
*
4
[4 min]
System Setup
NumLk [ON]
Touch Pad [Enable]
Speakers [Enable]
Display [External Monitor]
*
1
• User Password
Coffee break Password
*
2
[Enable]
Key Combination for Coffee break
*
3
[Alt+Ctrl+F9]
User Password
User Password Status Disable
Enter your new User Password twice.
Enter User Password [ ]
Enter User Password Again [ ]
Set User Password
Delete User Password
Supervisor Setup
Parallel Port (Address) [Automatic (PnP)]
Parallel Port Mode [Bidirectional]
Serial Port [Automatic (PnP)]
Sound Chip [Enable]
Sound Blaster Compatible I/O [Automatic (PnP)]
WSS CODEC I/O [Automatic (PnP)]
Sound IRQ-A [Automatic (PnP)]
Sound IRQ-B [Automatic (PnP)]
Sound DMA [Automatic (PnP)]
IrDA [Automatic (PnP)]
Floppy Operation [Enable]
Boot Up Drive [FDD
HDD]
• Supervisor Password
User Password Protection [Disable]
Setting the User Password ( page 17)
(Unable to select when the User Password Protection has been set.)
*1
When no external display is connected, display will be through the LCD.
*2
Can only be selected when the [User Password] has been set.
*3
Can only be selected when the [Coffee break Password] has been set.
*4
Can only be selected when the [Power Switch] has been set [Hibernation].
page 13
Sets the function of the power switch.
Able to set how long the interval will be until hibernation.
Sound DMA-A [Automatic (PnP)]
Sound DMA-B [Automatic (PnP)]
Supervisor Password
Supervisor Password Status Disable
Enter your new Supervisor Password twice.
Enter Supervisor Password [ ]
Enter Supervisor Password Again [ ]
Set Supervisor Password
Delete Supervisor Password
Setting Supervisor Password ( page 20)
CF-35PJJ8C
*
M/CF-35PJJ8C
*
E
To Next Page
Loading...
