Panasonic CF-M34 Series Toughbook - Security Menu

42
Setup Utility
Disable
Enable
To the sub-menu
Disable
Enable
Disable
Enable
No Protection
Protected
To the sub-menu
Password on boot
Set Supervisor Password
Display Boot Menu
Hard Disk Lock*
User Password Protection
Set User Password*
Security Menu
Password on boot [Enable]
Set Supervisor Password: [Enter]
Display Boot Menu: [Enable]
Hard Disk Lock: [Disable]
User Password Protection: [No Protection]
Set User Password: [Enter]
* Setting impossible when the Supervisor Password is not set.
( : Default)
Parameters
When the Setup Utility is started up with the User Password;
The User Password can be changed only when [User Password Protection] has been
set to [No Protection]. The User Password cannot be deleted.
Only [Password on boot] and [Set User Password] will be displayed.
NOTE