19
Installation Guide
(continued)
❏
Installation Procedures
Note: Disconnect the cable from the negative (–) battery terminal.
1
Mounting Collar
Dashboard
2. Securre the rear of the unit.
a) Insert Power Connector to the unit.
b) Check the electrical connection by referring to this operating instructions.
c) Insert the unit into Mounting Collar
and push it in until "click" is heard.
1. Secure the Mounting Collar
.
Insert Mounting Collar
into the vehicle's dashboard, and bend mounting tabs out with a
screwdriver.
●
When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure
your hands and fingers.
●
We strongly recommend you to wear gloves for installation work to protect yourself from injuries.
To Next Page
Loading...
