6
Radio Basics
Mode Selection
Press [MODE] to change the operation mode as follows.
Radio
a
Cassette
a
CD changer (when connected)
cd
To change to the tuner mode
In case of CD changer mode or Tape mode, press [MODE].
Selecting a Band
Press [BAND] to change the band setting as follows.
FM1
a
FM2
a
W/B
a
AM
c
(Weather Band)
d
"ST" indicator lights during reception of an FM stereo broadcast.
Manual Tuning
Press [TUNE
jj
] or [TUNE
ii
] to tune in a higher or lower
frequency.
Seek Tuning
Press and hold [SEEK
jj
] or [SEEK
ii
] for more than 0.5
seconds, then release it.
Seeking will automatically stop when a signal of the next broadcast
station is received.
Hold and release
To Next Page
Loading...
