CQ-5101U
12
Radio (Continued)
Preset buttons from [1] to [6]
Preset Station Setting
Up to 6 stations can be saved in each of the FM1, FM2
and AM preset station memories.
Note: Existing saved stations are overwritten with new
stations after following this procedure.
blinks once
Band
Press [BAND](APM) to select a desired band.
(
➡ page 11)
Auto Preset Memory (APM)
Hold down [BAND] (APM: auto preset memory) for more than
2 seconds.
• The 6 stations with good reception will be automatically
saved in the memory under preset buttons from
[1] to [6].
• Once set, the preset stations are sequentially scanned for 5
seconds each.
• To stop scanning, press one of the buttons from
[1] to [6] .
Manual Preset Memory
q Use manual or seek tuning to find a station. (➡ page 11)
w Hold down one of the preset buttons from [1] to [6] until
the display blinks once.
Preset Station Calling
Press the corresponding preset button from [1]
to [6] to tune in a preset station.
q
w
Caution
To ensure safety, never attempt
to preset stations while you are
driving.
Preset Number
To Next Page
Loading...
