CQ-5330U
10
Radio (Continued)
Preset buttons from [1] to [6]
Preset Station Setting
Up to 6 stations can be saved in each of the FM1, FM2
and AM preset station memories.
Note: Existing saved stations are overwritten with new
stations after following this procedure.
Caution: To ensure safety, never attempt to preset stations
while you are driving.
blinks once
Band
Press [BAND] to select a desired band.
(
➡ page 9)
Auto Preset Memory (APM)
Press and hold [BAND] (APM: auto preset memory) for more
than 2 seconds.
• The 6 stations with good reception will be automatically
saved in the memory under preset buttons from
[1] to [6].
• Once set, the preset stations are sequentially scanned for 5
seconds each.
• Press
[BAND] again to stop sequentially scan.
Manual Preset Memory
q Use manual or seek tuning to find a station. (➡ page 9)
w Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
Preset Station Calling
Press the corresponding preset button from [1]
to [6] to tune in a preset station.
q
w
To Next Page
Loading...
