Channel Preset
Category Setting
Up to 6 channels can be preset in XM1, XM2, and XM3 respec-
tively.
Preset channels can be simply called up by pressing [1] to
[6].
1
Select a channel.
2
Hold down [1] to [6] for more than 2 sec-
onds.
(blinks once)
Notes:
¡ New channels overwrite existing saved channels.
¡ Because preset memory setting is performed with service
IDs in each channel, a channel may switch to another that
has been stored under the same service ID when calling up
a preset channel. However, broadcasting contents are the
same as what the stored channel provides.
Category On/Off
1
Hold down [BAND] to switch category
mode ON or OFF.
The following functions are available when the category mode
is active.
¡ Enables category switching.
¡ Enables channel selection only within the category selected
by category switching.
Category Selection
1
Press [}] or [{] to display the category
name.
2
Press [}] or [{] while the category name
is displayed. Seeking will start.
XM Satellite Radio indicator
Channel
Preset NumberBand
Display change
Press [DISP] to change the display.
XM Satellite Radio Source Display
Band/channel
Channel name
Artist name
Song name
Category name
Clock time
To Next Page
Loading...
