1 ABOUT LEAD FREE SOLDER (PbF) 2
2 FEATUERS
2
3 REPLACEING THE FUSE
2
4 MAINTENANCE
2
5 NOTES
2
6 LASER PRODUCTS
2
7 DIMENSIONS
3
8 WIRING CONNECTION
4
9 BLOCK DIAGRAM
5
10 TERMINALS DESCRIPTION
6
1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
Caution :
•
• •
• Pb free solder has a higher melting point than standa rd
solder; Typically the melting point is 50 - 70°F (30 -
40°C) higher. Please use a soldering iron with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
•
• •
• Pb free solder will tend to splash when heated too high
(about 1100°F /600°C)
•
• •
• This lead free solder will be used for the products after
serial No. 1,000,001.
2 FEATUERS
•
• •
• Remote Control.
•
• •
• 18-FM, 6-AM presets with preset scan
•
• •
• Digital servo for reliable CD playback.
•
• •
• Removable face plate.
3 REPLACEING THE FUSE
Use fuses of the same specified rating (15A). Using different
substit utes or fuses with higher ratings, or connecting the
product directly without a fuse, could cause fire or damage to
the stereo unit.
4 MAINTENANCE
Your products is designed and manufacture d to ensure a
minimum of maintenance. Use a dry, a soft cloth for routine
exterior cleaning. Never use benzine, thinner or other solvents.
5 NOTES
[RADIO BLOCK]
Do not align the AM/FM package block. When the packag e
block is necessary, it will be supplied already aligned at the
11 PACKAGE AND IC BLOCK DIAGRAM 9
12 REPLACEMENT PARTS LIST
13
13 EXPLODED VIEW (Unit)
18
14 CD PLAYER MECHANICAL PARTS LIST
19
15 EXPLODED VIEW (CD Deck)
20
16 WIRING DIAGRAM
21
17 SCHEMATIC DIAGRAM-1
25
18 SCHEMATIC DIAGRAM-2
27
19 SCHEMATIC DIAGRAM for printing with A4 size
29
factory.
[CD DECK BLOCK]
This model has no servo alignment points because
microc omputer controls the servo circuit.
6 LASER PRODUCTS
CONTENTS
Page Page
2
CQ-C1323NW
To Next Page
Loading...
