EasyManua.ls Logo

Panasonic CQ-RXBT490W - Radio Operation; Radio Usage and Presets

Panasonic CQ-RXBT490W
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
CQ-RXBT490W/CR-LXBT490W
Radio (AM/FM)
Operation Flow
1
Press [SOURCE] to select the radio source.
2
Press [BAND] to select a band.
3
Select a station.
Frequency Adjustment
[6]: Lower / [7]: Higher
Note: For station search, hold down either of the but-
tons for more than 0.5 seconds and release it.
Preset Station Selection
Press the corresponding preset button from [1]
through [6] to tune in a preset station.
Radio Source Display
Band
Frequency
Preset Number
lights while receiving an FM stereo signal.
lights while receiving an FM stereo signal.
Display Change
Press [DISP] to change the display.
Radio mode display
(Frequency)
cd
Clock display
S
Station Preset
Up to 6 stations can be preset in each of AM, FM1,
FM2, and FM3.
Preset stations can be simply called up by pressing [1]
through [6].
Auto Preset Memory (APM)
With this operation, stations with good receiving
conditions can be automatically stored in the preset
memory.
1
Select a band.
2
Hold down [BAND] (APM) for more than 2
seconds.
The preset stations under best receiving conditions
are received for 5 seconds each after presetting the
stations (SCAN). To stop scanning, press one of the
buttons from [1] through [6].
Note: New stations overwrite existing saved stations.
Manual Station Preset
1
Tune into a station.
2
Hold down one of the preset buttons from [1]
through [6] for more than 2 seconds.
(blinks once)
Note: New stations overwrite existing saved stations.
Caution
To ensure safety, never attempt
to preset stations while you are
driving.
[SOURCE]
selects a source.
[DISP] (Display)
switches the information
on the display.
[BAND]
selects a band in the radio source.
(APM) (Auto Preset Memory)
executes APM in the radio source
(by holding it down for more than 2
seconds).
[6] [7]
decreases/increases the frequency. (For seek tuning, hold it
down for more than 0.5 seconds and release it.)
Preset buttons [1] through [6]
select a preset station in the radio source,
preset the current station (by holding it down
for more than 2 seconds).
[SOURCE]
selects a source.

Related product manuals