Panasonic CQ-VW120W - USB iPod;iPhone Control; Connecting and Controlling iPod;iPhone; iPod;iPhone Video and Audio Modes

27
28
CQ-VW120W
English
USB - iPod Control
Note:
¡ Please read the operating instructions of your
iPod/iPhone as well as this book.
¡
Please disconnect iPod/iPhone accessories such as ear-
phones before connecting the iPod/iPhone to this unit.
¡ If your iPod/iPhone is not working correctly, disconnect it
from this unit, reset it and then reconnect it to this unit.
¡ We shall not guarantee all the functions of the
iPod/iPhone to be connected.
¡ The number of displayable characters for a file name
is limited. (up to 252 bytes)
Controllable iPod,iPhone/software version
¡ iPod (5th generation, ver. 1.3)
¡ iPod nano (1st generation, ver. 1.3.1)
¡ iPod nano (2nd generation, ver. 1.1.3)
¡ iPod nano (3rd generation, ver. 1.1.2)
¡ iPod nano (4th generation, ver. 1.0.2)
¡ iPod classic (ver. 1.1.2)
¡ iPod touch (1st generation, ver. 1.1.4) (video play-
back is not supported.)
¡ iPod touch (2nd generation, ver. 2.1.1)
¡ iPhone (ver. 2.1.0)
* The applicable models have been confirmed as the
end of January 2009. We do not guarantee the oper-
ation with our future products or upgraded soft-
ware.
¡ When connecting (disconnecting) a iPod/iPhone, turn
down the volume of the unit.
¡ When connecting a iPod/iPhone, make sure the con-
nector is pushed all the way into the socket.
¡
Do not leave the iPod/iPhone for long periods of time in
places inside the car where the temperature rises too high.
Preparation:
¡Connect an iPod/iPhone to USB connector of this unit.
¡
Connect an iPod/iPhone to USB connector and AV IN of this unit with CA-LDC100X (option) for iPod/iPhone Video.
Caution
¡ Position the USB device and cable so that they do
not interfere with your driving.
¡ Do not connect any USB device other than a USB
memory, a USB audio player or an iPod/iPhone.
Do not connect multiple USB devices to the USB
connector. Supplying power to multiple USB
devices from the connector could cause overheat-
ing and smoking.
DIMMER
VOL
AV IN
MUTE
PUSH
MAP
CQ-VW120W
q
Touch
“
Source Button
”
.
d
Source Selection
Source Button
Operation Buttons
Title/text scroll
USB connector/AV IN
Open the cover to make the USB connector/AV IN acces-
sible and make a connection.
Playing time
[SRC/PWR]
Press
[SRC/PWR]/[SRC]
to change to the
desired mode.
To switch Operation Screen ON, touch the center of
touch panel or press [ENTER] on the remote control.
(only for video mode)
w
Touch
(iPod/USB) on the
Source Selection
Screen.
Video Mode Display
Source Button Playing time
Operation Buttons
Audio Mode Display
Source Button
Current track
Playing time
Operation Buttons
Title/text scroll
Title scroll
Button leading
to the audio
mode
Button leading
to the video
mode
VW120WOI01eng.qxd09.2.52:22PMページ28