Panasonic CQ-VW120W - AV Input Operation; Connecting and Selecting AV Sources

29
30
CQ-VW120W
English
AV
Note:
¡
Every time the source is switched from iPod mode to
AV mode while iPod/iPhone video file is playing on
this unit, the still image of iPod/iPhone video file will
be displayed on the screen with AV mode.
However, this phenomenon is not a trouble with this
unit and iPod/iPhone unit.
Make sure to remove the cable connection (CA-
LDC100X, option) of front AV IN to iPod/iPhone and
connect the desired AV device to front AV IN connec-
tor using supplied conversion cable for AV IN when
you want to enjoy AV mode under above circum-
stance.
¡
You can set up the system so that the AV mode is not
selected (source skip). (
a
page 34)
¡
If no operation is performed for 10 seconds or is
touched, the operation buttons disappear.
Input
Preparation:
¡Connect an optional external device to the AV IN.
You can view the images and listen to the sounds from
the connected external devices in the AV mode respec-
tively.
DIMMER
VOL
AV IN
MUTE
PUSH
MAP
CQ-VW120W
[SRC/PWR]
q
Touch
“
Source Button
”
.
Source Button
d
Source Selection
Press
[SRC/PWR]/[SRC]
to change to the
desired mode.
To switch Operation Screen ON, touch the center of
touch panel or press [ENTER] on the remote control.
w
Touch
(AV) on the
Source Selection
Screen.
AV IN
Open the cover to make the AV IN accessible
and make a connection.
VW120WOI01eng.qxd09.2.52:23PMページ30