Panasonic CR-SM4208U - Bluetooth Hands-Free Phone; Call Management; Call Mode and Answering Settings

28
Phone answering
Press [PHONE] during a call incoming.
The Bluetooth
®
indicator ( ) blinks during a call
incoming/making a call.
Notes:
 During a call incoming, the volume of this unit
automatically switches to 18, it restores to the
original volume setting when phone answering or
call rejecting.
 If the automatic answering function is activated,
conversation can be automatically started after
receiving a call. (Refer to the below.)
Phone hanging up
Press [PHONE] during a call.
Switching between the private
mode* and hands-free mode
Press [BAND] during a call.
The private mode and hands-free mode switch alter-
nately every time [BAND] is pressed.
(Private mode)
(Hands-free mode)
1DALNER=PAIK@AEO@AłJA@=OPDAIK@ASDANA
conversation is conducted with the mobile phone in
a usual manner without the hands-free function.
Incoming call rejection
Hold down [PHONE] for more than 2 sec-
onds during a call incoming.
Outgoing call termination
Hold down [PHONE] for more than 2 sec-
onds during making a call. (When other
party does not answer the call.)
Setting of automatic answering function
Hold down [6] for more than 2 seconds at
the standby state.
Turn [VOL]
The display changes as follows:
(Automatic answering deactivated)
!
(Automatic answering activated)
[PHONE]
picks up the phone,
makes a call, or rejects
the call.
[VOL]
switch the record
(PUSH SEL :Select)
selects items in the selection mode.
[BAND]
switches between the
private mode and hands-
free mode.
[!!!!!!!!]
activates the voice dial.
E]
p the phone
s
b
etween t
h
e
m
ode and hands
-
d
e.
!!
(Pincode mode)
(Bluetooth Address mode)
Press [SEEK]Ŀŀ
Cmvfuppui
¯
!.!Iboet.Gsff!Qipof