fe*
Signal strength indicator
[DISP] (Display)
switches the informa-
tion on the display.
[PUSH SEL]
selects “BASS” or “TREBLE” in the
audio menu.
SiriusXM antenna aiming mode
The signal level of the SiriusXM broadcast wave can
be examined to mount the antenna on a place where
the reception state is optimum.
1
Press [SEL] (Select) to select “BASS” or
“TREBLE” for the audio mode.
2
Hold down [BAND] for more than 4
seconds to activate the antenna aiming
mode.
3
Each time when [!!!!!!!!!] or [!!!!!!!!!] is
pressed, the satellite signal level and
terrestrial signal level are alternately
displayed.
(Satellite signal level, range: 0 to 100)
(Terrestrial signal level, range: 0 to 100)
Notes:
To exit from the SiriusXM antenna aiming mode,
press [SEL] (Select) or [DISP].
If “DIAGNOSTIC MODE” display appears, press
[SEL] or [DISP] to exit. (The diagnostic mode is
used for factory adjustment purpose.)
[BAND] (!!!!!/ )
(Pause/Play)
toggles between pause and
play with the instant replay
mode.
activates antenna aiming
mode.
toggles the category selec-
tion mode ON and OFF.
[!!!!!!!!] [!!!!!!!!]
skips to the previous/next channel in the SiriusXM instant
replay mode.
For fast reverse/fast forward, hold down either of them.
[GO LIVE]
SiriusXM instant replay mode.
[ŀ] [Ŀ]
skips to the next/previ-
ous song
To Next Page
Loading...
