Panasonic CS-BZ60ZKE - Quick Guide

2
Quick Guide
A
Clock setting
B
Basic operation
Inserting the batteries
1
Pull out the back cover of
remote control.
2
Insert AAA or R03 batteries.
3
Close the cover.
1
Press , then press to set the time.
• Press for approximately 5 seconds to show the time as 12-hour
(am/pm) or 24-hour.
2
Press to confi rm.
POWER
1
Press to start/stop the operation.
•
When the unit is ON, disappears from the
remote control display.
DRY
AUTO HEAT
COOL
2
Press to select the desired mode.
Up
Down
3
Press TEMP UP, TEMP DOWN to select
the desired temperature.
Selection range:
16.0 °C ~ 30.0 °C / 60 °F ~ 86 °F.
• Press for approximately 10 seconds to show the temperature as °C or °F.
Thank you for purchasing Panasonic Air Conditioner.
Table of Contents
Quick Guide …………………………………………………………………………………………… 2
Safety Precautions
………………………………………………………………… 3-5
Cleaning the Air Conditioner
………………………………………………………… 6
Information…………………………………………………………………… 7
The illustrations in this manual
are for explanation purposes only
and may differ from the actual
unit. They are subject to change
without notice.
Accessories
• Remote control
• AAA or R03 batteries × 2
• Remote control holder
• Screws for remote control
holder × 2
Before installation, the installer should:
Read the Installation Instructions, then request the customer keep them for future
reference. Remove the remote control packed with the indoor unit.
OPEN
1
2
3
Indicators
POWER
TIMER
POWERFUL
FAN SPEED/
A
B