114
6. Remove the Particular Piece
from the 3 hooks.
Figure 3
11. Detach all connectors as labelled from the
Main Electronic Controller. Then pull out the
Main Electronic Controller gently.
AC303
CN-FM
CN-STM1
CN-TH
9. Remove the earth wire screw.
10. Pull out the Main Electronic
Controller halfway.
7. Detach the CN-DISP connector
then remove the Indicator Complete.
8. Detach the lead wires AC306 (Black),
AC304 (Red) and G301 (Green)
from theTerminal Board.
Figure 4 Figure 5
To Next Page
Loading...
