EasyManua.ls Logo

Panasonic CS-LS9TKA - Page 15

Panasonic CS-LS9TKA
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
English
How to use
POWERFUL/
QUIET
To switch between powerful &
quiet
QUIETPOWERFUL NORMAL
POWERFUL: To reach temperature quickly
POWERFUL/QUIET
This operation stops automatically after
15 minutes.
QUIET: To enjoy quiet operation
POWERFUL/QUIET
This operation reduces air ow noise.
FAN SPEED
To select fan speed
(Remote control display)
AUTO
FAN
For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
AIR SWING
To adjust vertical air ow
direction
(Remote control display)
Keeps the room ventilated.
In COOL/DRY mode, if AUTO is set, the ap
swings up/down automatically.
Do not adjust the ap by hand.
To set the timer
2 sets of ON and OFF timers are available to turn
ON or OFF the unit at different preset times.
ON
OFF
SET
CANCEL
123
TIMER
C
AN
C
E
L
3
TIMER
1 2 3
1
Select ON or OFF timer Example:
OFF at 22:00
Each time pressed:
OFF
Cancel
2
Set the time
2
3
Con rm
SET
TIMER
To cancel ON or OFF timer, press
ON
or
OFF
to
select respective or then press
CANCEL
.
If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing
ON
or
OFF
to select respective or
then press
SET
.
The nearest timer setting will be displayed and
will activate in sequence.
When ON Timer is set, the unit may start earlier
(up to 15 minutes) before the actual set time
in order to achieve the desired temperature on
time.
Timer operation is based on the clock set in the
remote control and repeats daily once set. For
clock setting, please refer to Quick guide.
Note
POWERFUL/
QUIET
,
nanoe-G
,
SLEEP
Can be activated in all modes and can be
cancelled by pressing the respective button
again.
POWERFUL/
QUIET
Cannot be selected at the same time.
To adjust horizontal air ow direction
• Manually adjustable.
Auto Restart Control
If power is resumed after a power failure, the
operation will restart automatically after a period
of time with previous operation mode and air ow
direction.
This control is not applicable when TIMER is set.

Related product manuals