- 33 -
Piping
Connecting cable
More than approx. 95 cm
Pa
nas oni
c
Sleeve for
piping hole
Drain
hose
P ull out the piping and drain hose
Move the drain hos e
near to arrow mark and
tape it with piping in
a position as mentioned
in F ig. below
Drain hose
Piping
Cover for
the right piping
C ove r for the bottom piping
C over for the bottom piping
Cover for the left piping
: C entre of the piping hole
(left rear side of piping)
Make sure do not fasten and collect the power supply cord into the piping
trough, otherwise, it will cause heat or fire. The power supply cord must not
be stucked at the 2 clip-on positions and overly exposed between the mounting
plate and the indoor unit. Abnormal noise may be produced.
Warning
&6U:*.( &8U:*.( &6U:*.( &8U:*.(
&63:*.;&83:*.;&63:*.;&83:*.;
To Next Page
Loading...
