12
How to Use
Indicators
To adjust airfl ow direction To adjust airfl ow direction
Upper direction
Lateral direction
• Do not adjust the fl ap by hand.
* For details operation, refer “To Learn More....”
Not used
in normal
operation.
Press to restore the
remote control to
default setting.
To enjoy fresher and cleaner environment
• This operation combines both nanoe™X and
nanoe™-G (nanoe™ TECHNOLOGY).
• nanoe™ TECHNOLOGY automatically starts when
the unit is turned on.
• Press
to turn ON or OFF this operation
manually.
• This operation can be activated even when the unit
is OFF. Note that the fl ap and fan speed will operate
according to the remote control setting.
• If a power failure occurs during this operation,
this operation resumes immediately when power
resumes.
To reduce power consumption
• To reduce power consumption for better energy
saving without sacrifi cing comfort.
To adjust FAN SPEED and QUIET condition
FAN SPEED:
• When FAN AUTO is selected, the fan speed is
adjusted automatically according to the operation
mode.
• Select the lowest fan speed (
) to have a low noise
operation.
• When iAUTO-X mode is selected, the fan speed is
automatically set to AUTO. To adjust the fan speed,
cancel iAUTO-X mode.
QUIET:
• This operation reduces airfl ow noise.
To Next Page
Loading...
