Panasonic CS-VZ9SKE - Quiet Operation; Powerful Mode Operation

69
14.5 Quiet Operation
 Purpose
o To provide quiet operation compare to normal operation.
o Quiet operation can be operate with Auto, Cooling, Heating, Dry and nanoe.
 Control condition
o Quiet operation start condition
 When “QUIET”
QUIET
button at remote control is pressed.
 “QUIET” shown in LCD of remote control.
AUTO
COMFORT
PRE
HEATING
ODOR
CLEANUP
ECONAVI
FAN SPEED
QUIETnanoe
MENUCLOCK
POWERFUL
SLEEP
ON
OFF
SET
CANCEL
ON
AIR SWINGAIR SWING
RESET
COOL DRY HEAT
A
U
T
O
CO
MF
O
RT
PRE
H
EATIN
G
O
D
O
R
C
LEAN
U
P
EC
O
NAVI
FAN
S
PEE
D
nano
e
M
EN
U
C
L
O
C
K
P
O
WERF
U
L
S
LEE
P
ON
O
F
F
S
E
T
C
AN
C
E
L
AIR
S
WING
A
IR
S
WING
RE
S
E
T
C
OOL
DRY
HEAT
o Quiet operation stop condition
 When one of the following conditions is satisfied, quiet operation stops:
 QUIET button is pressed.
 Stop by OFF/ON button.
 FAN SPEED button is pressed.
 ECONAVI button is pressed.
 AUTO COMFORT button is pressed.
 POWERFUL button is pressed.
 When fan speed is changed, fan speed follows the setting change.
 When operation mode is changed, resume previous operation setting.
 During quiet operation, if timer “ON” activates, quiet operation maintains.
14.6 Powerful Mode Operation
 During cooling or heating operation by pressing the “Powerful” button for a certain period of time, it will blow out
the strong cold air or strong heat air.
 When the powerful mode is selected, the internal setting temperature will shift lower up to 2°C (for Cooling/Dry)
or higher up to 2°C (for Heating) than remote control setting temperature for 20 minutes to achieve the setting
temperature quickly.
 Maximum operation for Powerful (Cooling/Dry) is 60 minutes to achieve the setting temperature quickly and
resume normal operation when room temperature reaches or less than 16°C.
 Maximum operation for Powerful (Heating) is 60 minutes to achieve the setting temperature quickly and resume
normal operation when room temperature reaches or more than 30°C.
 Fan speed will be set as “Auto” and ECONAVI operation will be canceled.
o Powerful operation stop condition
 When one of the following conditions is satisfied, powerful operation stops:
 QUIET button is pressed.
 Stop by OFF/ON button.
 OFF Timer activates.
 POWERFUL button is pressed again.
 Powerful operation continues for 60 minutes.