74
14.12 nanoe Operation
This operation provides moisturizing effect on the skin or hair due to the generation of (fine particle ions wrapped
in water), to provide a deodorant and sterilization effect.
It is depends on the season, ambient environment (temperature and humidity), hours of use, human. This
preserves user's skin's moisture, coherency feeling of hair.
This operation also for reduces the smell in the room, smell that sticks on curtains (smell of cigarettes and foods)
and constrains propagations of mold and bacteria. The deodorization effect depends on the ambient environment
(temperature and humidity) hours of use, type of smells and fabrics.
The “nanoe” generates ions using the air in the room.
nanoe operation can be set together with cooling, heating and dry operation.
If press the air-purification button in nanoe operation, the air-purification operation can be operate.
If press the nanoe button during operation stop, the nanoe operation can operate nanoe solely.
Recommend using nanoe in the below condition:
Indoor temperature: about 5~35°C (focused temperature: more than about 2°C).
Humidity: about 30~85%
nanoe ON/OFF condition
Condition nanoe operation
1
Demo Mode
OFF
Cooling operation check
nanoe abnormality
nanoe re-start stanby
2 Out of mistification area OFF
3 nanoe check
After checking nanoe more than 2 minute OFF
Other than above ON
4 Cleaning indoor unit nanoe operation fan mode ON
5 Remocon setting nanoe OFF OFF
6 Filter cleaning OFF
7 Inside cleaning
Heating or after heating fan OFF
Other than above ON
8 Thermo OFF
Odor cutting
OFF
Heating operation
9 Indoor fan motor 440 RPM OFF
10 Operation stop OFF
11 Other than above ON
To Next Page
Loading...
