Panasonic CT-34WX50 - Setting When 480 P Signals (Sequential Scan) Are Input through COMPONENT VIDEO INPUT

58
CH
VOL VOL
CH
ACTION
Press to select 480p COLOR MATRIX.
Note:
Use the up and down buttons to change
pages.
Setting when 480p signals (sequential scan) are input through COMPONENT VIDEO INPUT
Displays input signals (480p signals) in a natural color from digital equipment adaptors
connected to COMPONENT VIDEO INPUT (Y, Pb/Cb ,Pr/Cr input terminals).
1
2
Press to set.
SDTV : When the input signal is a normal TV
system (NTSC).
HDTV : When the input signal is a Hi-Definition
system (HD).
Note:
480p COLOR MATRIX does not need to be set when using Hi-Definition equipment or 480i output equipment.
Press to end.
Press the MENU button to display the MENU screen and select SETUP.
Press to select VIDEO.
Press to display the VIDEO screen.
MENU
CH
VOL VOL
CH
ACTION
MENU
ADJUST
CUSTOM
SELECT
PROGRAM CHANNELS
LANGUAGE
LOCK
CLOSED CAPTION
VIDEO
SET UP
EXIT
PAGE
ACTION
VIDEO
PAGE 4 / 4
SELECT
SDTV HDTV
480p COLOR MATRIX
EXIT
CHANGE
VIDEO 1
GAME
SDTV HDTV
480p COLOR MATRIX
CH
VOL VOL
CH
ACTION