7.2. Wireless Remote Control (OPTIONAL PARTS)
NOTES:
- Ensure that the correct button is pressed as simultaneous
pressing of the multiple buttons will not make the setting correct.
- The illustration above is for explanatory purpose only. The
appearance will be different during actual operation.
- If using the wireless remote control in conjunction with the wired
remote control, the settings made from the wireless remote
control will appear on the wired remote control display (except
when making timer settings).
- Buttons marked with * are not needed for normal operation. If one
of these buttons is pressed by mistake, press the same button
once more to cancel the operation.
- When the power resumed after power failure, the unit will restart
automatically with all previous settings preserved by the memory
63
To Next Page
Loading...
