145
Figure 3 Figure 4
18.1.1.3 To Remove Discharge Grille
Figure 5
8 Pull out the main
electronic controller
halfway.
9 Detach connectors as labeled from the
electronic controller. Then pull out main
controller gently.
5 Detach the Earth wire
screw, lead wires AC306
(Black) and AC304 (Red)
from the terminal board.
7 Remove screw to remove
terminal board complete.
6 Detach the CN-DISP
connector then remove
the indicator complete.
CN-FM
AC303
CN-STM1
CN-STM3
CN-RMT
CN-CNT
CN-TH
10 Pull cut to remove the drain
hose from the discharge grille
11 Then pull the discharge grille
downward gently to dismantle it.
Discharge Grille
To Next Page
Loading...
