Panasonic CU-RZ25TKR - Page 149

149
18.2.1.3 To Remove Electronic Controller
Figure 3 Figure 4
18.2.1.4 To Remove Discharge Grille
Figure 5
8 Pull out the main
electronic controller.
9 Detach connectors as labeled from the
electronic controller. Then pull out the mai
n
controller gently.
5 Detach the Earth wire
screw, lead wires AC306
(Black) and AC304 (Red)
from the terminal board.
5 Remove screw to remove
terminal board complete
and earth wire.
6 Detach the indicator
connector then remove
the indicator complete.
AC303
CN-STM1
CN-CNT
CN-FM
CN-STM2
CN-STM3
CN-RMT
CN-RCV
CN-TH