EasyManua.ls Logo

Panasonic CU-RZ80VKR - To Remove Control Board; To Remove Cross Flow Fan and Indoor Fan Motor

Panasonic CU-RZ80VKR
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
153
19.1.1.4 To Remove Control Board
12 Remove 4 screws holding the
control board then pull out the
control board.
Figure 6
19.1.1.5 To Remove Cross Flow Fan and Indoor Fan Motor
Figure 7
15 Remove the bearing by pulling it out gently. 14 Remove the 2 screw from the evaporator
Figure 8

Table of Contents

Other manuals for Panasonic CU-RZ80VKR

Related product manuals