155
WARNING
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
19.2 CS-RZ50VKRW CS-RZ60VKRW CS-RZ71VKRW CS-RZ80VKR
19.2.1 Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
19.2.1.1 To Remove Front Grille
3 Hold both sides of the front grille and
remove it by pulling up and toward
yourself gently.
1 Lift to open the horizontal vane
gently.
2 Remove 3 caps and 4 screws at the
bottom of discharge vane and
1 screw at the front grille.
Figure 1
19.2.1.2 To Remove Horizontal Vane
2 hooks (left hand side)
4 Removing the control
board cover by
releasing the 2 hook.
Figure 2
To Next Page
Loading...
