Panasonic CU-RZ80VKR - To Remove Electronic Controller

156
19.2.1.3 To Remove Electronic Controller
8 Pull out the main
electronic controller.
9 Detach connectors as labeled from the
electronic controller. Then pull out the mai
controller gently.
5 Detach the Earth wire screw, lead
wires AC306 (Black) and AC304 (Red)
from the terminal board.
7 Remove screw to remove
terminal board complete
and earth wire.
6 Detach the indicator
connector then remove
the indicator complete.
AC303
AC304
CN-STM2
CN-CNT
CN-FM
G301
AC306
CN-STM3
CN-STM1
CN-RMT
CN-RCV
CN-TH
CN-DISP
n
HAJEM-A
Figure 3 Figure 4
19.2.1.4 To Remove Discharge Grille
10 Pull out to remove the drain hose
(behind the discharge grille)
from the discharge grille outlet.
11 Then pull the discharge grille
downward gently to dismantle it.
Discharge Grille
Figure 5