Panasonic CU-RZ80VKR - Cleaning Instructions

16
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction and
you may see error code “H99”. Please consult
authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fi n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade, away
from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter Attach air fi lter
Insert into the unit
Anti-bacterial fi lter
Anti-bacterial fi lter.
(Fitting location may
vary on models.)
• Clean the fi lter whenever necessary.
• Wash/rinse the fi lter gently with water to avoid
damage to the fi lter.
• Dry the fi lter thoroughly under the shade, away
from fi re or direct sunlight.
• Replace the fi lter every 10 years or replace any
damaged fi lter. Part no.: CZ-SA22P
Aluminium fi n
Front panel
Air fi lters
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Coils and fans should be clean
for at least every 6 months by an
authorised dealer.
Outdoor unit
Clear debris that surround the unit.
Clear any blockage from drain
pipe.
Front panel
Wash gently and dry.
Remove the front panel
1
Release the
hooks at
both ends
2
Pull out and lift up
Close it securely
1
Insert
at both
sides
2
Push in
3
Close down
4
Press both ends and center of the front panel
Anti-bacterial fi lter
(Unit may vary depending on the model)