1. Place the front grille on the cabinet first.
2. Secure the front grille to the main chassis using screw.
11.10. Insert the e+filter
•
Attach the e+filter (part no. CZ-SF6p) to the frame.
•
Slot in the e+filter and the frame (part no. CZ-SFW6P) to
the front grille.
•
The e+ filter and the frame can be obtained separately from
your nearest servicentre.
11.11. Insert the Air Filter
•
Attach the air filter to the intake grille.
11.12. Place front intake Grille over
the front grille
•
Slide the front intake grille slightly to the right to reattach the
tabs then push it down to close tight.
11.13. Removal the front intake grille
1. Remove the front intake grille.
Pull up the front intake grille about 0° and slide it slightly to
the left to unhook the tabs.
2. Remove the air filter.
Tilt up and pull out the air filter by the holder.
20
CW-XC100VK / CW-XC120VK
To Next Page
Loading...
