Panasonic CW-XC120AU - Maintenance, Energy Saving, and Support; Energy Saving and Helpful Information

Touch Control
Panel
Remote Control Display
(1) Press the TIMER button to
check
remaining programmed timer
setting.
-The figure will be displayed for 10 seconds then
will
automatically switch back to temperature setting.
Note: The timer figure will change
according
to the time remaining (if you set it
to
3 hours from now, the timer will
show
when you check the timer an hour
later).
9.3.9. Cancel Timer.
Touch Control
Panel
Remote Control Display
(Cancellation within 10 seconds)
(1) Press the SET/CANCEL button
to
the timer setting.
-The temperature reading and SET/CANCEL
indicator
turn off simultaneously.
Temperature setting will be displayed again 10
seconds
(or, press the TEMP/TIMER “Upward” or “
Downward”
show the temperature reading immediately).
(Cancellation after 10 seconds)
(1) Press the SET/CANCEL button
to
the timer setting.
-The SET/CANCEL indicator light will turn off.
However the temperature remains displayed.
10. Air Conditioner Installation
- Caution:
PleaseremovetheshippingblocksfixedtotheCompressorandFrontGrillebeforei
nstallation.
- Installation Box Contents.
23