direct sunlight, consider building an awning to shade the cabinet
while providing ample area for the heated air to be exhausted from
the condenser (both sides) and the top.
This unit is designed for installation in standard double hung
windows.
Note: The unit may also be installed “Through the Wall”. You
should, however, observe standard carpentry practices and frame
the opening without violating local ordinances.
Note: It is much easier, and also safer, to install
the empty Cabinet into a window first and we
would suggest that you follow this procedure.
10.1. Preparation of Air Conditioner Chassis.
10.1.1. Remove the Front Intake Grille.
- Pull up the Front Intake Grille about 90° and slide it slightly to the
left to unhook the tabs .
10.1.2. Remove the Air Filter.
- Tilt up and pull out the Air Filter by the holder.
25
To Next Page
Loading...
