Panasonic CY-TV7000W - Page 22

Pin
No.
Name Description I/
O
Volt(V)
52 TV ANT4 TV Antenna 4 change the
signal output
O 0
53 TV LOCK TV PLL lock detect I 0
54 TV COM TV PLL data output O 0
55 TV CLK TV PLL clock signal output O 0
56 TV CE TV PLL enable signal output O 0
57 VD TV Vertical Sync selection signal
(TV)
O 5.2
58 VD MONI Vertical Sync selection signal
(Monitor)
O 0
59 BEEP Beep signal output O 0
60 NC (Connecting to ground) - 0
61 NC (Connecting to ground) - 0
62 OPEN
SW
Open position detecting
signal input
I 5.3
63 CLOSE
SW
Close position detecting
signal input
I 5.3
64 NECK
SW
Monitor position detecting
signal
I 5.3
65 VIDEO
SENS
NAVI/DVD screen selector
signal input
I 5.3
66 SIDE
BRAKE
Side Brake detection I 0
67 DIVER
VD
Vertical sync signal input (for
Diversity)
I 5.3
68 REMO IN Remo-con data input I 5.3
69 NAV
DISP
NAVI screen interrupt reguest
signal input
I 5.3
70 BATT Baack-up power supply
detecting signal input
I 5
71 ACC Accessory power supply
detecting signal input
I 5
72
REVERSE
Reverse signal input I 5.3
73 PALUS Monitor start-up position
detecting pulse input
I 0
74 REGCPU (Connecting to ground
through 0.1MF Capacitor)
- 3.6
75 VSS Ground - 0
76 X2 Main system clock (4.19MHz) - 1.5
77 X1 Main system clock (4.19MHz) I 1.5
78 REGOSC (Connecting to ground
through 0.1MF Capacitor)
- 3.6
79 VDD +5V power supply - 5.2
80 RESET System reset signal input I 0
22