Panasonic CZ-256ESMC3 - Page 163

163
Conguring the system
Setting
6
Setting the input conditions.
z The items you can set depend on the input target selected.
6
 When air conditioning unit alarm batch is selected
Item Explanation
MltAlrms Select either “ON” or “OFF”.
y “ON” indicates that an error alarm has been
transmitted.
y “OFF” indicates that a unit has recovered from an
error.
 When a digital input/output device is selected
DigitalInput Select either “ON” or “OFF”.
y “ON” is displayed when digital input signals are on.
y “OFF” is displayed when digital input signals are off.
 When an indoor unit has been selected
I/DUnt* Ope. Select either “ON” or “OFF”.
y “ON” is displayed when operation of the
indoor units has been started.
y “OFF” is displayed when operation of the
indoor units is stopped.
Alarm Select either “ON” or “OFF”.
y “ON” indicates that an error alarm has
been transmitted.
y “OFF” indicates that a unit has recovered
from an error.
Room T Set the room temperature. The touchscreen
numeric keypad appears when you touch
the text box.
Select either “min.” or “max.”.
y “min.” indicates when the temperature is
above the set temperature.
y “max.” indicates when the temperature is
below the set temperature.
* Set one of the condition items on the right.
7
Touch [Register].
z The “Input point settings” dialogue closes.
z To cancel the settings, touch [Cancel].
7
8
Select the output point border (8-1) and
touch [Set] (8-2).
z The “Output point settings” dialogue is displayed.
8-
1
8-
2
9
Select the output target from the list.
z Output targets include digital input/output devices, indoor
units (all at once, individual, and control groups).
9
Continued on next page
Linked control of air conditioning units