196
Conguring the Hybrid GHP/EHP control
Setting
7
Touch [Set].
z The operation dialogue is displayed.
7
8
Set EHP upper limit value/GHP upper
limit value.
z Set a value for both EHP upper limit value and GHP upper
limit value.
z The settings can be in the range 0 to 130 and “Unlmtd”
(unlimited).
8
9
Touch [Register].
z The settings are registered and the operation dialogue
closes.
z To cancel the settings, touch [Cancel].
9
10
Touch [Register].
z To cancel the settings, touch [Cancel].
10
Using individually set upper limit maps [Individual map settings]
To Next Page
Loading...
