Panasonic CZ-RWSK2 - Operating Multiple In;Outdoor Units Simultaneously; Group Control Setup

EN-15
EN
Address
Display on the
Remote Control
•••••
CZ-RWSU2
Position of
receiver’s
(inside indoor
unit) address
switch
The position of the
receiver’s address
switch does not
matter.
•••••
For 1, 2 and 3, set the
switch on the right and for 4,
5 and 6, to the left.
CZ-RWST2
Position of
receiver’s
(inside indoor
unit) address
switch
The position of the
receiver’s address
switch does not
matter.
１２３
４５６
１２３
４５６
•••••
For 1, 2 and 3, set the
switch on the left and for 4,
5 and 6, to the right.
CZ-RWSL2
Position of
the operation
panel’s (inside
indoor unit)
address switch
The position of the
receiver’s address
switch does not
matter.
•••••
For 1, 2 and 3, set the
switch on the left and for 4,
5 and 6, to the right.
CZ-RWSC2
Position of
the Receiver’s
Address Switch
The position of the
receiver’s address
switch does not
matter.
•••••
For 1, 2 and 3, set the
switch on the left and for 4,
5 and 6, to the right.
１２３
４５６
Instructionhonbunall.indbEN-15Instructionhonbunall.indbEN-15 2012/09/1212:39:142012/09/1212:39:14