Adjusting White Balance
The SD Video Camera adjusts White Balance
automatically, however, depending on the scene or
light conditions, the Automatic White Balance may not
be able to bring out natural colors. In such cases, the
white balance can be adjusted manually.
Set the Recording Mode
• Do not cover the White Balance sensor with your
hand when recording pictures. (-) 25)
1 Set the Auto/Manual Selector Switch to
[MANUAL].
• The [AWB], [-r--r--i+] and [AF] Indications
are displayed.
"_ Slide the Auto/Manual Selector Switch to
[SELECT] and select [AWB].
3 Press the [It- SET] Button and set a
desired White Balance Mode.
• Automatic White Balance Adjustment [AWB]
• Indoor Mode (recording under incandescent
light) [_,_,.]
• Outdoor Mode [_+i]
• Fluorescent light Mode [!:_]
• The white balance setting that was previously set
manually [_mzl]
To Resume Automatic Adjustment
• Press the [1_ SET] Button and set [AWB]. Or, set the
Auto/Manual Selector Switch to [AUTO].
• For other notes, see page 82.
,White Balance Sensor
The White Balance Sensor _t_determines the nature of
the light source during recording.
• Do not cover the White Balance Sensor with your
hand during recording, otherwise, White Balance will
not function normally.
,Adjusting White Balance Manually
Point the SD Video Camera at a full screen white
object. The actual lighting you will be
photographing in should illuminate the white
object. Press the [1_ SET] Button until the [&=z;]
Indication stops flashing.
SELECT
M EG2"
OhOOr_OOs
R OhO5m
2
SELECT
I MPEG2 ONI
I,_A_ 0h0Om00s
R OhO5m
OhOOmOOs
R Oh05m
36
To Next Page
Loading...
