• Designating Scenes to be Printed
(DPOF)
PICTURE Mode only
DPOF Setting Printing data (DPOF Setting), such as
the number of imagesto be printed, can be written to
the Memory Card.
"DPOF" means Digital Print Order Format.
I Press the [MENU] Button and select
[DPOF] on [Scene] to [Select] and then
press the [1_ SET] Button.
2 Select the scene for DPOF setting and
then press the [1_ SET] Button.
oThe present setting quantity is displayed under
the right ofthe selected picture.
3 Press the I 1/11side of the Multi-function
Button to select the desired number of
prints and then press the [1_ SET] Button.
oThe [_] Indication isdisplayed and attached to
the selected scene.
oUp to 99 prints can be set for one scene.
To Release All the DPOF Settings
/ Press the [MENU] Button and select
[DPOF] on [Scene] to [Cancel all] and
then press the [1_ SET] Button.
2 The confirmation screen appears and
then select [YES] and press the [1_ SET]
Button.
To Check the DPOF Settings in Slide Show
Press the [MENU] Button and select
[Slide Show] on [Others] to set [DPOF]
and then press the [1_ SET] Button.
eDPOF set images are displayed one by one for
approx. 5 seconds each.
oPress [ll] to stop.
oPress [||] to pause.
oFor other notes, see page 83.
! o
42
To Next Page
Loading...
