Go To
,Jump to the first or last scene (Top/
End)
From the Playback Mode screen, you can jump to the
first scene or last scene.
I Press the [MENU] Button and select
desired item on [Go To] and then press
the [1_ SET] Button.
e[Top]: To go to first scene.
o[End]: To go to last scene.
,Jump to the first, end of last, or
specification scene (Top/End/Specify)
While playing back a scene, you can jump to the
specification scene.
Follow step 1 of "Go to the first or last scene (Top/
End)" while playing back scene,
o[Top]: To go to the start.
o[End]: To go to the end of last scene.
o[Specify]: To go to a specified point.
Select [Specify]
2 Press the I I/II/<I<I/IH_ side of the
Multi-function Button and select desired
point (_ and then press the [1_ SET]
Button.
_): The present playback point
@: The select point
• <</IH_ (Tap this button)
[MPEG2]: Move the point to every 10 seconds.
[MPEG4]/[PICTURE]: Move the point to every
scene.
• <</IH_ (Press and hold this button)
[MPEG2]: Move the point to every 1 minute.
[MPEG4]/[PICTURE]: Move the point to every
10 scenes.
• 11: Move the point to start
• 11:Move the point to end of last scene
• Go to the specified point and enter the playback
pause status.
50
To Next Page
Loading...
