Installing MediaStage & USB
Driver
Do not connect the USB cable until the USB driver has
been installed.
1 Insert the supplied CD-ROM into the
personal computer's CD-ROM drive.
eThe launcher for the installation is activated
automatically.
2 Click [MediaStage & USB Driver].
eWhen [MediaStage & USB Driver] screen
appears, click [Next].
3 Read License Agreement carefully, and
click [Yes], if you accept the terms of the
agreement.
4 Complete the installation according to the
message.
eThe USB Driver is installed automatically.
elf you use other than Windows XP, when the
DirectX 8.1 setup screen appears, install it
according to the message. (Failure to install
DirectX 8.1 disables you from using MediaStage
for AVl00.)
• After rebooting the computer, the MediaStage for
AVl00 is enabled.
2
3
61
To Next Page
Loading...
