Panasonic Diga DMR-EX77 - Page 71

71
RQT8859
You can delete analogue channels and set the analogue channel
details.
After performing steps 1–4 (➡ 69)
5 Press [3, 4] to select “Settings for
Analogue Services” and press [OK].
6 While “Manual Tuning” is highlighted,
and press [OK].
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press the
“Red” button.
∫ To change the tuning settings for individual
programme position
7 Press [3, 4, 2, 1]
to select a
programme position
and press [OK].
Press [3, 4] to select an item and press [1].
Analogue Manual Tuning
Pos Programme position in the table
(You cannot change the programme position.)
Name To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [OK].
If the station name needs a blank space, select
the blank between “Z” and “¢”.
Channel To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press [OK].
Fine Tuning To obtain the best tuning condition
Press [3, 4] to adjust the best tuning condition
and press [OK].
≥Press [1] to return to “Auto”.
Mono To select the type of sound to be recorded
Press [3, 4] to select “On” if the stereo sound is
distorted due to inferior reception conditions, or if
you want to record the normal (mono) sound
during a stereo or bilingual broadcast, and press
[OK].
Manual Tuning
Pos Name Ch
Pos Name Ch
Delete
1 ARD 4
2 ZDF
2
3 N3
5
4 HR3
8
5 BR3 10
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
OK
RETURN
SELECT
Pos
Name
Channel
Fine Tuning
Mono
1
4
Auto
RETURN : leave
Manual
Tuning
ARD
Off
RETURN
SELECT
Changing the unit’s settings
EX77_87GN.book Page 71 Wednesday, May 30, 2007 1:10 PM