This feature helps compensate for any
unintentional hand or body movement. It
can be used in both the Recording and
Playback (VCR) modes.
• Other Digital Functions are turned off
automatically when the EIS and Digital
Zoom are selected.
I CAMERA model
Set POWER to CAMERA.
2
[is
_-NORMAL] I EIS ON I
Press EIS to stabilize the picture.
• Picture flicker may be observed when
taping under fluorescent lighting
conditions.
• The EIS indicator flashes when the
light level is inadequate.
• Turn D.E.I.S. OFF during recording
when using a tripod.
Press REC/PAUSE to start recording.
Press EIS again to cancel.
• Be sure that D.E.I.S. is turned off
when not needed.
POWER
D.E.I.S. may not function when...
• Patmcorder movement is too
extreme.
• Recording a subject with distinct
horizontal or vertical stripes,
• Recording in low light situations.
• Recording a subject under a great
amount of fluorescent light.
• Recording a scene with very fast
motions.
BPLAY
2, C, DEiS
iVCR mode ]
A Set POWER to MCR.
B Press • (PLAY) to start playback.
C Press EIS to stabilize the picture.
D Press EIS again to cancel.
• Be sure that D.E.I.S. is turned off
when not needed.
• When using D.E.I.S in VCR mode, the
image size is slightly larger.
36
To Next Page
Loading...
