Insert a rigid wire, such as an
extended paper clip into point (A)
and lift cover up.
_.Before you begin
Set POWER to OFF. !
Replace bulb using a clean cloth or
4 Replace lens
Using Tweezers or needle-nose
pliers, carefully remove bulb.
• Take unit to servicenter if you need
assistance.
tissue. (Do not touch with fingers.)
cover.
• Handle bulb gently. Excessive force may
cause bulb to crack.
DANGER:
se only replacement burb (PART NO, LSLL0028) suppriedby Panasonie to reduce risk
fire. Handte new bulb with cloth or tissue as skin oils decrease bulb life. Remove lens
ver and allow burb to cool before replacing to avoid possible burn hazard.
This product has a fluorescent lamp that contains a smalr amount of mercury. It also
contains lead in some components. Disposal of these materials may be regulated in
your community due to environmental considerations. For disposal or recycling
information please contact your local authorities, or the Electronics Industries Alliance:
<http:/l_>
48
To Next Page
Loading...
