Panasonic DMP-BD75 - Connecting to an Amplifier;Receiver; Connecting to a Broadband Network

Connections & Settings
9
VQT3A92
STEP 2 : Connecting to
an amplifier/receiver
STEP 3 : Connecting to
a broadband network
The following services can be used when this unit is
connected to broadband.
≥ Firmware can be updated ( 12)
≥ You can enjoy BD-Live ( 16)
≥ You can enjoy Network Service ( 18)
≥ DLNA feature ( 19)
For details about connection method, refer to the
instructions supplied with the connected equipment.
≥ Set “HDMI Audio Output” to “On” ( 24).
≥ Set “Digital Audio Output” depending on the connected
amplifier/receiver ( 23).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” ( 20).
≥ When using the TV or amplifier/receiver that does not
have the indication of “(ARC)” (non-ARC-compatible) on
the HDMI terminal, in order to enjoy TV’s sound by
amplifier it is also required to connect the amplifier/
receiver and TV using an optical digital cable.
HDMI IN
AN
/100BASE-TX
HDMI IN
HDMI IN
(ARC)
(ARC)
Multi channel
speakers
Amplifier/receiver
HDMI cable
HDMI cable
∫ LAN cable connection
≥ Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
LAN
10BASE-T/100BASE-TX
Broadband router, etc.
LAN Cable
LAN Cable
Modem
(Broadband)
*Provided by ISP
DMP-BD75_VQT3A92_eng.book 9 ページ ２０１０年１２月９日 木曜日 午後９時０分