Panasonic DMP-BDT380 - Page 9

Getting started
- 9 -
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using this
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers or
characters
4 Cancel
5 Change soundtrack (> 16)
6 Basic playback control buttons (> 16)
7
[For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
Show Pop-up menu (> 16)
[For_the_South_East_Asia]
Show USB Sharing menu (> 21)
8 Show Top menu (> 16)
9 Show Option menu (> 22)
10 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display
11 Transmit the remote control signal
12 Open or close the disc tray (> 14)
13 Show the status messages (> 17)
14 Show Miracast
TM
screen (> 19)
15 Show the Home Screen of the Network
Service (> 18)
16 Exit the Menu screen
17
[For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
Show Netflix screen (> 18)
[For_the_South_East_Asia]
Show Pop-up menu (> 16)
18 Show HOME menu (> 15)
19 [3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 16)
20 Return to previous screen
21 Disc tray (> 14)
22 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
23 USB ports (> 14)
24 Display
25 Open or close the disc tray (> 14)
26 Stop (> 16)
27 Start play (> 16)
28 Standby/on switch (Í/I) (> 13)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Rear panel terminals (> 10–12)
∫ Available keys for HDMI CEC (> 21)
3 Number keys
6 Basic playback control buttons
9 Option button
10 Coloured buttons (red, green, yellow, blue)
16 Exit button
19 [3, 4, 2, 1]/[OK] button
20 Return button