Panasonic DMP-BDT500 - Digital Audio Connections; Optical or Coaxial Digital Audio Output; 5.1;7.1 ch Audio Output Connections

12
VQT3W07
≥ Set “HDMI Audio Output” to “Off” (> 31).
≥ Set “Digital Audio Output” (> 31).
Cable connections
A Front speaker (L/R)
B Surround speaker (L/R)
C Centre speaker
D Subwoofer
E Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
≥ Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”, depending on the used terminal
(> 32).
≥ You can set the “Analog Audio Output” from the “Easy Setting” (> 14).
≥ When connecting equipment with HDMI AV OUT terminal, set “HDMI Audio Output” to “Off” (> 31).
DIGITAL AUDIO OUT (OPTICAL or COAXIAL)
Optical digital cable
Amplifier/receiver
OPTICAL IN
COAXIAL IN
Coaxial cable
OR
5.1/7.1ch AUDIO OUT
Amplifier/receiver
Connect Audio
cables to terminals
corresponding to
the speakers you
have connected.
DMP-BDT500EB-VQT3W07.book 12 ページ ２０１２年２月２４日 金曜日 午後４時１７分