- 28 -
Playback
[UB400]
∫ Sound Effect Frequency
Set the maximum sampling frequency for the
audio selected in “Sound Effects”.
≥ Even when “96/88.2kHz” is selected, an audio
source with a sampling frequency of 96 kHz or
higher will be output with the original sampling
frequency.
≥ When “Sound Effects” is set to “Off”, this setting
is disabled.
∫ DSD Decode Sampling Frequency
Select the settings that suit your sound quality
preferences.
∫ DSD LPF Setting
Select the settings that suit your sound quality
preferences.
∫ Dialogue Enhancer*
2
The volume of the centre channel is raised to
make dialog easier to hear.
[UB400]
∫ High Clarity Sound
Stop processing signals that affect the audio
quality to make the audio quality clearer. (> 31)
Select whether or not to output images.
This setting is able to switch by pressing green
button on the remote control during music
playback.
≥ If “On (Video Off)” is selected, the setting will be
cancelled after you play back a video.
*1
Not every function can be set individually.
*2
This function is effective for audio from HDMI OUT or
DIGITAL AUDIO OUT only when “Digital Audio Output” is
set to “PCM” (> 30).
∫ Signal Format
∫ Graphic Display Level
3D position for the Option menu or message
screen, etc. can be adjusted during 3D playback.
3D Settings
Original Keep original picture format.
Side by side
3D picture format comprising
of left and right screens.
DMP-UB400_300_EB-TQBS0065.book 28 ページ ２０１７年３月１７日 金曜日 午後６時５２分
To Next Page
Loading...
