Getting started
SQT0351
16
Connection
3D programmes or 4K images can be played back when this unit is connected to a 3D or 4K
compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
• To enjoy 4K output, you need to connect this unit to a 4K compatible TV.
• When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
It is recommended that you use Panasonic’s HDMI cable.
• In case problems occur for the playback of content such as no picture or picture distortion, check the
HDMI cable, related connections and the compatibility of TV video input.
To output images in 4K, connect the HDMI cable to a 4K compatible terminal of the connected
device.
Basic connections
To connect and register the USB HDD
(optional)
Refer to “Registering the external HDD
(USB HDD)”. (> 77)
About HDMI cable
Use the High Speed HDMI cables.
Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s
HDMI cable.
When outputting 1080p signal or 24p(4K) signal,
please use HDMI Cables 5.0 meters or less.
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
TV’s rear panel
RF coaxial cable
(supplied)
To the CATV terminal
CATV coaxial cable
DMR-BCT84_74EN_eng.book 16 ページ ２０１４年７月２４日 木曜日 午後５時３分
To Next Page
Loading...
