Playing back video
SQT0351
48
Operation during play
Press [AUDIO].
• It will switch depending on the contents
recorded every time it is pressed.
[HDD] [USB _HDD] (For recorded titles, > 9)
[BD-RE] [ BD- R]
1 Press [STTL ].
2 Press [OK].
3 Select “On” or “Off”, then press [OK].
• If you want to switch the subtitle language,
select it in the Basic Operation menu (> 80).
[BD-V] [DVD-V], Xvid and MKV:
Display with “Subtitle Settings” in the Basic
Operation menu (> 80).
• Xvid and MKV: If the subtitles text are not displayed
correctly, try changing the language settings (> 86, Subtitle
Text ) .
[HDD] [USB _HDD] (For recorded titles, > 9)
[BD-RE] [ BD- R]
Press [TEXT ].
• Teletext display mode is TOP (FLOF) only.
• Some functions may not work.
• Teletext cannot be displayed when the subtitles are set to
ON.
You can switch the screen mode.
Refer to “Switching the aspect ratio of the
screen”. (> 100)
Preparation
Connect 3D compatible TV to this unit. (> 16)
• Perform the necessary preparations for the TV.
Play back following the instructions displayed
on the screen.
Perform the following settings as necessary.
3D BD-Video Playback
It is also possible to play back 3D discs in 2D
(conventional video). (> 82, 86)
3D Type
If 3D video cannot be played back in 3D, you may
be able to play it in 3D by changing the setting.
(> 82, 90)
3D AVCHD Output
If 2D AVCHD video is recognised as 3D video and
cannot be played back correctly, you may be able
to play it by changing the setting. (> 82, 90)
3D Playback Message
Hide the 3D viewing warning screen. (> 82, 90)
Changing audio
Switching subtitles
Displaying the Teletext
Aspect
3D video playback
Preparatory 3D settings
DMR-BCT84_74EN_eng.book 48 ページ ２０１４年７月２４日 木曜日 午後５時３分
To Next Page
Loading...
